It’s funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
Bambu is working on it already — can’t print unless you’re connected to the internet and send your files through their server, can’t connect to the printer with other slicers besides their slicer.
They had to walk that back some; there is now a “developer mode” where old standard functionality is still exposed, but they’re clearly working as hard as they can to turn it shitty.
There were a bunch of companies that tried right after the FDM patents expired in 2009. Most of them were completely forgotten or ignored because they were closed source (and more importantly closed material) companies and never got very far off the starting blocks.
Bamboo learned from them and decided to pull the rug out after getting a foothold with finally selling decent prebuilt hardware for less than a fortune (see Ultimaker before buying out MakerBot at least).
They’re actually behind. 3D printers are a much newer industry. Most industries start out super open, competitive and collaborative. This speeds up development to consumer-grade products. Eventually one or two companies gain sufficient marketshare to start enforcing anti-consumer shitfuckery. Look at the recent drama with Bambu printers and you’ll find that’s exactly what’s happening. It’s a tale as old as time.
Framework actually trolled us into thinking they were going to release a printer but instead they went into a market segment where everything was already modular, repairable and upgradable and gave us something that was not, at all. But hey, they gotta capitalize on the AI nonsense too, I guess?
2D printers used to be like this.
They all worked with open, universal drivers, no additional software, and any ink cartridge that fit inside the bay.
But then companies figured out that people will just buy the cheapest printer on offer, regardless of everything else.
Has anyone figured out how to 3d print a 2d printer yet?
Edit: actually, scratch that entirely. How difficult do you suppose it would be to create an aftermarket non-malicious logic board to drive the hardware in lieu of the malicious OEM board? After all, it’s not the cartridges refusing to print.
There is a piece of software which will take a word document and convert it into an embossed 3D print file. So you could always just skip the middleman and 3D print yourself a plaque version of your document instead.
Idk if the tech for 3d printers is really more complex. All of the parts are readily available, basically nothing needs to be specially made except the hot end (one single metal part)
The consumer experience for 2d printers worse IMO but that’s probably because I’m stuck on Windows with its terrible printing system
It’s funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
2D printer companies should be shamed to death.
Over time as 3D printers go from tinkerer’s toy to household staple, I’d expect them to become more locked down and anti-consumer.
Bambu is working on it already — can’t print unless you’re connected to the internet and send your files through their server, can’t connect to the printer with other slicers besides their slicer.
They had to walk that back some; there is now a “developer mode” where old standard functionality is still exposed, but they’re clearly working as hard as they can to turn it shitty.
By my count, it’s been tried twice.
Makerbot after the Stratasys buyout.
There were a bunch of companies that tried right after the FDM patents expired in 2009. Most of them were completely forgotten or ignored because they were closed source (and more importantly closed material) companies and never got very far off the starting blocks.
Bamboo learned from them and decided to pull the rug out after getting a foothold with finally selling decent prebuilt hardware for less than a fortune (see Ultimaker before buying out MakerBot at least).
Makers by Cory Doctorow is a great novel that explores exactly this.
They would have to become sci-fi level capable before they would be considered household staple items.
They’re actually behind. 3D printers are a much newer industry. Most industries start out super open, competitive and collaborative. This speeds up development to consumer-grade products. Eventually one or two companies gain sufficient marketshare to start enforcing anti-consumer shitfuckery. Look at the recent drama with Bambu printers and you’ll find that’s exactly what’s happening. It’s a tale as old as time.
Framework actually trolled us into thinking they were going to release a printer but instead they went into a market segment where everything was already modular, repairable and upgradable and gave us something that was not, at all. But hey, they gotta capitalize on the AI nonsense too, I guess?
Enshitification is the word of this century
Of this species.
The consumer getting a product is just a byproduct of generating profits.
2D printers used to be like this.
They all worked with open, universal drivers, no additional software, and any ink cartridge that fit inside the bay.
But then companies figured out that people will just buy the cheapest printer on offer, regardless of everything else.
People that Weasle their way up the corporate ladder have been prefectly groomed to have no shame.
and to be as amoral as possible.
Has anyone figured out how to 3d print a 2d printer yet?
Edit: actually, scratch that entirely. How difficult do you suppose it would be to create an aftermarket non-malicious logic board to drive the hardware in lieu of the malicious OEM board? After all, it’s not the cartridges refusing to print.
There is a piece of software which will take a word document and convert it into an embossed 3D print file. So you could always just skip the middleman and 3D print yourself a plaque version of your document instead.
Just print it, roll some ink on it and slap a sheet of paper on top. There you go, printing 2.0 or something.
That sounds like a 15th century printing press with extra steps.
Kind of, but with less wood and a lot more micro plastics. That’s how you can tell it’s modern.
I used to have wood a lot more often, before microplastics.
If you start sieving your urine you’ll never have to buy filament ever again. Really it’s a blessing in disguise.
It’s not that hard to convert a cheap 3D printer into a pen plotter is you want to do some 2D printing.
Except those who aren’t.
Idk if the tech for 3d printers is really more complex. All of the parts are readily available, basically nothing needs to be specially made except the hot end (one single metal part)
The consumer experience for 2d printers worse IMO but that’s probably because I’m stuck on Windows with its terrible printing system