Courtesy to Twitter user XdanielArt (date of publication: 8 June 2024)
You must log in or register to comment.
Honestly, GIMP is not a good alternative to Photoshop. I know, “it’s free” is enough for many people, but it … just isn’t.
With GIMP 3.0 it’s a bit better at least, they’ve finally added non-destructive editing:
https://www.youtube.com/watch?v=qfaq-Cm1ZkAFull changelog here:
https://www.gimp.org/release-notes/gimp-3.0.htmlI’d dare say that unless you’ve already learnt Photoshop (and have to unlearn it) then Darktable+GIMP works fine for home photo editing.
If you’re used to Photoshop and your skills with it is what puts bread on the table… then I completely understand not switching tools.As somebody who has been trying to decided which of the RAW photo editors to use, I can tell you that Darktable has a steep learning curve over Lightroom. The UI is incredibly dense and the names of sliders don’t make sense unless you’re an image science expert.
I’ll take your word for it, I’ve never used Lightroom.
Whenever I played around with Darktable it seems finding a tutorial to get the effect I wanted was just a minute of searching away, and there’s a ton of beginner tutorials available too.
https://www.darktable.org/2024/12/howto-in-5.0/But then I was the kid that rtfm the game manual on my way home from the store and love dense UIs as an adult. :)
Darktable is a godsend to me for converting film negatives.But I pretty much only use image conversion, RGB curve, then fidget with the exposure and RGB sliders in negadoctor a little more then I’m done. No idea how to do anything else.
Been usin DT for close to a year now. I agree the learning curve is a little steeper than light room but once you get it, everything clicks into place. I can’t believe how powerful this program is and it’s free. It’s unbelievable
I use krita way more than gimp
Krita is also more of a Paint.NET than a Photoshop replacement.
I love love love GIMP!!!
But yeah it’s not a PS alternative, and tbh that’s not really what it’s supposed to be or what its developers want out of it. it’s different
It is an alternative if you are a casual user.
No
You could give Photopea a try, if you’re looking for a free (as supported) alternatives, it has all core functions and a interface that looks very familiar. No installation required so you can easily test it, and use it in any browser (not sure how well it works without mouse and keyboard or low end devices though).
If you want more than core functionality I don’t think there is a (legally) free option out there.
My go-to PS app:
All online, same controls, hell, same icons. I’m a little stunned that Adobe hasn’t sued them into oblivion.
You can pay to drop the ads, but I’m not really seeing much end user benefit otherwise. Not seeing ads ATM, maybe I blocked 'em.
Always with the GIMP hate. You make a better free alternative then.
Another great alternative to Acrobat (Reader) is Okular; it’s free, open source and runs on Linux, Windows and macOS.
It’s been my go-to PDF reader since switching to Linux, since it already came pre-installed with Manjaro KDE.
i mean eveb masterpdf editor paid would help to not support adobe. this list should not be an image but a wiki. bitwig i also expected to see.
What the actual fuck is adobe acrobat? A pdf editor with subscription model payment? Firefox, the browser, can edit pdf files. It’s 2025.
Firefox can do basic annotating, adding text and adding pictures but it can’t make a new PDF from scratch.
You may be confusing Adobe Acrobat Reader with Adobe Acrobat? Full Acrobat is the proprietary tool to make a PDF file from scratch including some of the more complex functions.
PDF is an open standard and has been for a while, so there are now plenty of alternatives for most of the functions. LibreOffice Draw and Inkscape can do a lot of PDF creation functions but not all. There are also “print to PDF” options to create basic PDF documents too.
However some of the more niche functions are not widely supported or well supported; and there isn’t really any opensource dedicated PDF maker that I’m aware of. Layout tools are abundant but I think it’s things like building forms and document signing that is less easily replicated. There is Master PDF - a fully functional PDF maker which is proprietary and available for Linux; it $80 for a perpetual license. I’m not aware of any other alternatives myself.
In AEC work we’ve moved almost exclusively to a competing PDF tool called Blubeam, which is proprietary but very worth the price, with tools for scaling, dimensioning, and producing material takeoffs from PDF drawings. Much of what you’d use Acrobat for in a more typical office environment are absent or limited, though.
Adobe acrobat is THE PDF editor. PDF is a proprietary format created and developed by Adobe. Any software that can edit PDFs is doing so in a format they do not have any control over. And there just aren’t any proper PDF editors that are feature complete. now if you’re an individual who needs to make a PDF in the privacy of your own home, by all means, use a cheap or free or FOSS application to do so. But if you need that PDF to be readable and useable and seamlessly compatible on other computers for other users for ever? Better pay the Adobe tax because there is a good chance, it won’t look the way you expect it to when someone opens it up in Adobe which their company definitely has.
I’m not sure this true - PDF is an open standard. The issue isn’t generally with layout and reproducibility - a good PDF maker and a good reader will give you an accurate representation of how it looks on all devices once the PDF is created.
Certainly there isn’t a dedicated FOSS tool for make PDFs; Libre Office and Inkscape do a decent job but not perfect which may be what you’re referring to. And they’re not dedicated PDF makers plus the real problem is building fillable forms and signature tools.
But there is a proprietary alternative called Master PDF that is a dedicated and supports all the PDF standard features I believe; one perpetual license is $80 compared to Adobe subscription based charging. I’m not aware of other options myself but they may exist. But it’s a viable alternative to the “adobe tax”.
Also of course if you have Office 365 from Microsoft, you can use Word to export docs to PDF reliably (in my experience). Obviously as far as you can get from FOSS, but it is an option on Linux via web browser if you have it from work for example; at least you don’t have to pay Adobe but it’s scraping the bottom of the barrel for this threat I know!
There are a few other PDF editors that are cheaper, but they don’t have the same features. PDF seems like something that has outlived its purpose. There has to be other document formats that provide a similar or better experience and prevents alteration.
Any document format could prevent alteration with the addition of a digital signature.
should be? yes. could be? if one of the big corpo’s with money decides to spend it, yes. But don’t assume ‘there has to be one’, it’s not like file formats suddenly appear like a rare insect or something.
PowerPDF or Kofax or whatever it’s called now was very close to parity if not exceed functionality for most office jobs.
Yes, this is my company’s preferred solution.
it won’t look the way you expect it to when someone opens it up in Adobe which their company definitely has.
That sounds like a problem between them and Adobe tbh
not true. dont oay adobe so more pdfs will look like the user intended. dont fall adobe scams like weird functions that should be in a pdf anyways. pdfs created with masterpdfeditor look exactly as intended. so, again: no, adobe is a scam. always has been.
Funny, it’s been less than 24hrs and I got a ticket in complaining about why PDFs look one way in Ease US PDF editor and totally different in Adobe Reader. You’re just wrong. I didn’t say it was worth the money to pay for Adobe, and I didn’t say it wasn’t a scam. But I do tell the truth when it comes to true parity, there are competitors to PDF editing but there is no free PDF editors that properly do the job 100% of the time.
i do not know what “ease US PDF editor” is and dont care. there are plenty of broken editors. i am saying you are wrong to think only adobe scamware can create pdfs that look as intended in the reader.
I don’t know how it stacks up price-wise, but I’d argue Bluebeam is a far superior PDF editing program. It even covers some word processing, Illustrator, and some PowerPoint adjacent things.
That being said, I can’t see it as practical for the average consumer.
How does Sumatra fall into all of this? It’s an open source version
Or if you have to use Adobe products, at least have the decency not to pay for them.
Neat list, but imo photoshop is closer to being called a photomanipulation/image editor than photography. lightroom is the more dedicated photography software.
Also I wouldn’t call paint.net an alternative to photoshop. I love paint.net but its a relatively simple image editor and its functionally limited even with plugins.
Yes, that was my first question: what about Photoshop as an image editor? What is a comparable replacement for that?
GIMP has been the photoshop alternative for many years now. It stands for gnu image manipulation program, and it is an image editor. The category is named a bit weird but the program listed is the right one.
Just a small thing, but as of the latest release Inkscape has a functioning live-trace tool
It was one of the biggest things keeping me using illustrator but I used inkscape’s trace yesterday and it worked great
I’ve never used vector programs. What is a “live tracer”?
It’s a tool that helps ‘trace’ a raster image into vector shapes and paths
it’s useful for creating vector artwork from raster images - sometimes a logo or icon is only available in a poor resolution raster image, and so having an easy way to convert it into vector saves a ton of time.
I used it yesterday to create an SVG file for CNC plotting of a company logo. It would have taken me a few hours to hand-trace it myself
I sometimes get commissioned to make a logo here and there. This would come in very handy.
Oh jeeze, that’s been around as a plugin in inkscape since at least 2011, I remember vectorizing an episode poster from Adventure Time using it. But I’d believe it wasn’t quite as good as whatever photoshop had. I used the “never learn photoshop” trick to be happy with what I’ve got, but then I only edit images for fun.
How much time have you put into Inkscape now? I’m hankering for some reviews from people who are also refugees from the Adobe ecosystem.
I don’t use it regularly enough to weigh in comprehensively- I use it mostly for processing svg drawings created in other programs for cnc plotting, or for compiling svg drawings onto standardized layouts for sending to a printer
My only complaint with inkscape is that it’s a bit slow with rendering complex shapes/canvases with many points, but otherwise it does everything I need from a vector program.
The CNC plug in is so useful! I also made my wedding save the dates in it and some figures for a scientific manuscript: worked great.
Shout out to pdfgear.
Does almost all the pdf file manipulation anyone needs and it’s free.
GIMP is unfortunately not a good competitor, the UX/UI is atrocious, and that’s after spending 25 years using it now… I switched to Krita for most things at this point. GIMP needs some sort of revamp.
Like maybe a GIMP 3.0?
I see two new features that look fantastic, but the rest of the UI seems likely unchanged. I’ll definitely give it a shot though.
Seriously, gimp is barely usable for anything, they need to put the damn thing our of our misery.
And it spawned gtk, which is yet another monument to software masochism.
Will give krita a shot, this shouldn’t be that hard.
Just started using reaper, coming over from audition and it’s so similar I didn’t have to re-learn anything.
REAPER rules. I started on ProTools in 2010. Ditched it for Reaper in 2012 and never looked back. Best $60 I ever spent. I’ve gladly bought multiple licenses for my devices over the years.
REAPER is absolutely one of the best pieces of software out there. I’ve been using it too since maybe 2009, though not so much in the last few years (not moved to an alternative, I’m just not doing so much audio these days).
I love the business model, the development cycle, etc. and even though it’s not open source it kinda has a similar community feeling. Every bit as feature-filled and capable as any of the industry standards.
No open source Flash alternatives? Disappointing.
It’s called HTML5.
Blender isn‘t flash but it‘s one of the best 2D animation programs out there and used by major studios.
Libre Office Draw is another Ai alternative
What’s the Audacity/Tenacity deal?
Enshitification by owners of Audacity including telemetry. They eventually backed down, but that was after Tenacity forked off it and people started using and improving it.
Don’t know if you can call this “enshittification” as that implies it got progressively worse. It was bought out by a corporation and immediately turned to shit while also being neglected.
Apparently Audacity has been bougth by a company which subsequently did crap with it. https://www.reddit.com/r/linux/comments/s9isqj/help_tenacity_a_fork_of_audacity_after_its/
Not sure how good Tenacity currently is
Kinda hilarious that anyone uses Premiere Pro when Resolve is better, and free (with very optional features locked behind 1-time paywall). David Manning had a revelation and made a video about this recently. As did PewDiePie.
Countering Animator with Blender, that’s brutal. For at least some stuff Blender is also the better Illustrator.
is the image not loading only for me?
It loads for me on voyager, but is unreadable.
