I have a refurbished Lenovo Thinkcentre that I was running Truenas off of. Everything was working great, but it got hit with a power surge and after lots of trouble shooting it appears the motherboard is fried and I don’t trust my ability to soder and fix it.

No now I need to upgrade my setup. Wondering what is a good sub $300 computer I can order that will run Jellyfin, Immich, and a few light services off of? With Truenas you seem to need two SSDs. One to boot and one to run apps, so it seems like a mini PC will not work.

I have a seperate HDD drive bay with a few hdd’s in it full of shows and picture. Just need a PC to run my services.

I would prefer something I can order off Amazon or can be shipped quickly so I can get back up and running again.

  • mushroommunk@lemmy.today
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    Just about any of the Intel N series minipcs are often suggested for just Jellyfin. I haven’t looked at them too much yet.

  • TRBoom@lemmy.zip
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    So I trick for the double drives is to pop in a low profile usb drive and install the os on that. Then you can use the ssd/hdd for other things.

      • TRBoom@lemmy.zip
        link
        fedilink
        English
        arrow-up
        0
        ·
        2 months ago

        Yup! If you installed the os on it.

        So you have one usb with the iso flashed to it and a second to install the os on. Use the first to install to the second.

    • frongt@lemmy.zip
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      Make sure the OS is good for that, or you use a very high endurance USB drive, or you use two drives in a mirror and are prepared to replace them. Most USB drives are not designed for constant use, like the log writes your OS will be doing.

      • klankin@piefed.ca
        link
        fedilink
        English
        arrow-up
        0
        ·
        2 months ago

        You can mount /var and /tmp to the ssd, lot of tutorials on doing this for Pis SD cards if your googling.

    • Rai@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      Yissss I got a bunch of tinys for 50USD each. I5/16GB DDR4/256GB NVMe. They run home theater computers and Linux servers AMAZINGLY. I would have bought more if they had more available.

        • Rai@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          0
          ·
          2 months ago

          I thought so, too! Forgive my ignorance as I’m just getting into Linux and selfhosting—what do you use opnsense and promox on separate machines for?

          Currently one of my machines is running Fedora as a home media computer, playing stuff in the living room 24/7 for the cats. The other one I’ve got Win10LTSCIoT and CatchyOS dual booted on, mostly using that for general computer stuff in Linux and running a modded game server in Windows.

          • krnhotwings@programming.dev
            link
            fedilink
            English
            arrow-up
            0
            ·
            2 months ago

            I have one dedicated for opnsense, which runs my firewall/router. I used to use a Ubiquiti ER-Lite, but its compute power was a little lacking for certain features I wanted running. One of the niceties of running pfsense/opnsense on a “real” computer is that it just runs faster and boots faster after a software update, haha. I also have tailscale on it so that I can remotely access my home network.

            Opnsense can technically be run as a VM on proxmox, but it’s generally not advised to do so. The proxmox machine is running unifi network for my ubiquiti wireless AP, adguard home, home assistant OS in a VM, and frigate in a VM, but I’ve been thinking of consolidating the various container services and VMs into just all containers running on a uCore OS installation instead of proxmox.

  • BT_7274@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    It won’t be on Amazon, but I found a ton of older generation Mac minis available on Craigslist in my area. I picked one up for $50 and installed Ubuntu server. Thing’s been running like a champ for 2 years.

    Edit: should have fully read your post. No idea about installing truenas on it. I’d assume most would be single ssd machines.

    • NutinButNet@hilariouschaos.com
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      +1 on Mac mini as well. I just checked OfferUp in my area and M1-M5 are insanely expensive ($500+, M1 coming out about 6 years ago) but really good machines especially for their size and decent on power consumption too.

      But downside of a M series is either you run macOS or Asahi Linux and nothing else yet.

      So go for the Intel Mac Minis which are much cheaper and can run nearly any Linux distro with little to no issues as you would on a Windows PC. I’m seeing $50 range in my area as well. Older are good because RAM can be upgraded on some of them, but not all. Would be wise to do research on whichever seems right.

      • lazylemons@lemmy.today
        link
        fedilink
        English
        arrow-up
        0
        ·
        2 months ago

        A word of warning on Linux on Mac though. Oftentimes there can be weird quirks with power management and suspend/hibernate. For a server though I guess that point is moot.

      • grue@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        2 months ago

        But downside of a M series is either you run macOS or Asahi Linux and nothing else yet.

        I’m OOTL; what is it about Apple Silicon Macs that apparently make them such trouble to support? If one distro can manage it, what’s stopping that code from being upstreamed to the mainline kernel etc.?

  • muxika@piefed.muxika.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    You you could do most of that with a raspberry pi5, 8GB. With a whole kit, you can get it for under $250. I’m running 3 at my place: 1 for media (servarr stack, JF, Navidrome, Invidious), 1 for the Fediverse (Mastodon, Piefed, Peertube, WordPress), and 1 for anything else.

    • tehWrapper@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      The newer raspberry pis have gone up in price so much that the limited port selection is off putting to me now. You could pick up an older thinkcentre and do so much more.

  • cecilkorik@piefed.ca
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    Find something on craigslist or local pickup on ebay, check government/police surplus, or do some freecycling. At least in my area a lot of people leave their e-waste computers at Best Buy, often in the doorway, nobody cares if you come and pick them up. Even if they’re broken (and they’re often perfectly functional and sometimes surprisingly powerful) it likely only takes a few before you’ve got some functional combination of parts.

    It’s likely not as much of a picker’s heaven anymore since I imagine the huge wave of windows-10-obsolete computers being thrown away for no reason has probably mostly subsided, but there is so much old and perfectly functional stuff out there it’s really unjustifiable to be buying something new especially at today’s modern prices.

    • SpikesOtherDog@ani.social
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      I purchase a bunch of machines off government auction, patch then up, and pass them back out for very little. Anything with 4 cores and 8 GB memory should do it. If you can get something with DDR4, that’s a big step. Bonus points of it was made after 2018.

  • badlotus@discuss.online
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    The key here is old hardware. I built a TrueNAS box out of an old Dell Optiplex 990. I got it from a friend for free but you can find one online for well under $200. Later you can upgrade the box bit-by-bit if you care to. I upgraded the case, motherboard, cooler, and power supply over time. It’s been a capable NAS for several years even though it’s using a 2nd gen Intel core i3.

      • potatoguy@mbin.potato-guy.space
        link
        fedilink
        arrow-up
        0
        ·
        2 months ago

        mainly the v4 (comparing to other server cpus)

        It consumes less energy than the other server cpus from intel that are generally available.

        • fuckwit_mcbumcrumble@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          0
          ·
          2 months ago

          The CPU may not use too much power, but the chipset and all the supporting circuitry will. Supporting 4/8channel memory aint free. And RAM can use a ton of power too.

        • Possibly linux@lemmy.zip
          link
          fedilink
          English
          arrow-up
          0
          ·
          2 months ago

          Except the hardware itself is really old which means that the performance will be much lower and thus the CPU usage will be higher. The older systems also have much slower memory and bus speeds.

          You would be much better buying a more modern consumer CPU since the performance boost will mean that the CPU utilization will be lower. Most workloads including Jellyfin do not benefit from tons of slow CPU cores. Things will work better the higher CPU and ram frequently you have.

          Server CPUs are a poor choice outside of very specific applications

          • potatoguy@mbin.potato-guy.space
            link
            fedilink
            arrow-up
            0
            ·
            2 months ago

            My E5-2667 v4 (8 cores, higher frequency) using almost nothing of energy while watching some asmr on freetube and responding:

            Edit: it has a higher tdp than the 2650 v4, and has 16gb of ddr4 ram

            • Possibly linux@lemmy.zip
              link
              fedilink
              English
              arrow-up
              0
              ·
              2 months ago

              11W is actually a lot lower than what I was expecting. It isn’t crazy efficient but it isn’t bad.

              Are you sure it supports DDR4? The Intel spec page says it has a clock of around 2.5GHz with DDR3 memory

              • potatoguy@mbin.potato-guy.space
                link
                fedilink
                arrow-up
                0
                ·
                2 months ago

                From dmidecode, DDR4:

                Edit: Broadwell supports both DDR3 and DDR4, with some caveats

                Handle 0x0073, DMI type 17, 40 bytes
                Memory Device
                        Array Handle: 0x0070
                        Error Information Handle: Not Provided
                        Total Width: 72 bits
                        Data Width: 72 bits
                        Size: 8 GiB
                        Form Factor: DIMM
                        Set: None
                        Locator: DIMM_B1
                        Bank Locator: NODE 1
                        Type: DDR4
                        Type Detail: Synchronous
                        Speed: 2667 MT/s
                        Manufacturer: Undefined
                        Serial Number: A64010B5
                        Asset Tag: DIMM_B1_AssetTag
                        Part Number:                     
                        Rank: 1
                        Configured Memory Speed: 2400 MT/s
                        Minimum Voltage: 1.14 V
                        Maximum Voltage: 1.26 V
                        Configured Voltage: 1.2 V
                
                Handle 0x0076, DMI type 17, 40 bytes
                Memory Device
                        Array Handle: 0x0070
                        Error Information Handle: Not Provided
                        Total Width: 72 bits
                        Data Width: 72 bits
                        Size: 8 GiB
                        Form Factor: DIMM
                        Set: None
                        Locator: DIMM_D1
                        Bank Locator: NODE 1
                        Type: DDR4
                        Type Detail: Synchronous
                        Speed: 2667 MT/s
                        Manufacturer: Undefined
                        Serial Number: A6401009
                        Asset Tag: DIMM_D1_AssetTag
                        Part Number:                     
                        Rank: 1
                        Configured Memory Speed: 2400 MT/s
                        Minimum Voltage: 1.14 V
                        Maximum Voltage: 1.26 V
                        Configured Voltage: 1.2 V
                
  • Possibly linux@lemmy.zip
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    I would pickup a old workstation of of a site like eBay. Last time I was shopping around they were pretty cheap but that was pretty insanity pricing

    • minfapper@piefed.social
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      Yep. Assuming you’re in the US, searching eBay for “Dell optiplex” is the way to go.

      Those are mostly used by companies that upgrade their entire fleet in one go so they sell the old ones for cheap in great condition.

  • AnotherMadHatter@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    Hit up local government auctions. Sometimes they sell 2-4 computers in a lot, sometimes they sell 157. I got 4 Lenovo mini computers for $34 each in an auction a while back. They only needed hard drives.

  • fuckwit_mcbumcrumble@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    If you want a NAS on the cheap my preference is just get any cheap “normal” PC, a case with a good amount of HDD bays. Move the drives into the PC, and you have all the expand ability you could dream of. You can find plenty of DDR4 machines for cheap now. Then as ram prices come down you can go up to 128gb of ram as long as your board has 4 slots.

    Anything on craigslist/FB marketplace will work.

    • EvacuateSoul@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      This is the ticket. I got an enormous case in trade with a hoarder buddy, used mobo/cpu on ebay, new cheapo PSU, etc

      Still just have 3 drives in but space for like 10 of them once I install the 2x cd bay hdd holder that fits a few more drives.

  • BCsven@lemmy.ca
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    Openmediavault might be an option also, if the drive thing is a problem with TrueNAS